S7712(v200r010)未设置端口为边缘端口,日志提示该接口为边缘端口
问题描述
现网运行一S7712交换机,没有将接口配置为边缘端口,但是日志提示该接口为边缘端口。
Nov 28 2018 14:54:30 NB-DSY-02GUI-3U-7712 %%01MSTP/4/EDGE_PORT(l)[27]:Edged-port GigabitEthernet12/1/3 received BPDU packet, then the active state of the edged-port will be disabled!
Nov 28 2018 14:54:28 NB-DSY-02GUI-3U-7712 %%01MSTP/4/EDGE_PORT(l)[28]:Edged-port GigabitEthernet12/1/1 received BPDU packet, then the active state of the edged-port will be disabled!
Nov 28 2018 14:54:28 NB-DSY-02GUI-3U-7712 %%01MSTP/4/EDGE_PORT(l)[29]:Edged-port GigabitEthernet12/1/0 received BPDU packet, then the active state of the edged-port will be disabled!
Nov 28 2018 14:54:28 NB-DSY-02GUI-3U-7712 %%01MSTP/4/EDGE_PORT(l)[30]:Edged-port GigabitEthernet12/1/2 received BPDU packet, then the active state of the edged-port will be disabled!
interface GigabitEthernet12/1/0
description TO WIFI RUIJIE SWITCH
port link-type trunk
port trunk allow-pass vlan 2 to 4094
#
interface GigabitEthernet12/1/1
description TO WIFI RUIJIE SWITCH
port link-type trunk
port trunk allow-pass vlan 2 to 4094
#
interface GigabitEthernet12/1/2
description TO WIFI RUIJIE SWITCH
port link-type trunk
port trunk allow-pass vlan 2 to 4094
#
interface GigabitEthernet12/1/3
description TO RUIJIE WIFI 4
port link-type trunk
port trunk allow-pass vlan 2 to 4094
解决方案
经核实:端口使能生成树协议后,会默认启用边缘端口自动探测功能,当端口在(2 × Hello Timer + 1)秒的时间内收不到BPDU报文,自动将端口设置为边缘端口,否则设置为非边缘端口。
----[Port29(GigabitEthernet12/1/12)][FORWARDING]----
Port Protocol :Enabled
Port Role :Designated Port
Port Priority :128
Port Cost(Dot1T ) :Config=auto / Active=20000
Designated Bridge/Port :0.340a-98ae-1df0 / 128.29
Port Edged :Config=default / Active=enabled
版权声明:
作者:SE_Gao
链接:https://www.cnesa.cn/2045.html
来源:CNESA
文章版权归作者所有,未经允许请勿转载。
共有 0 条评论